來源：http://www.xiangbolan.com 發布時間：2022-04-09 17:46:43
Now many household appliances are made of aluminum products, so this time the aluminum coil is very important, so what is the status of the aluminum coil? What should we pay attention to when using it? The following aluminum coil manufacturers to talk about it.
What are the states of aluminum coil?
Color coated aluminum coil can give color aluminum products rich color, and has good gloss and smoothness, and superior texture and feel, but also can increase the sense of layers and three-dimensional sense. Can protect objects exposed to the atmosphere, by ultraviolet radiation, wind, rain, frost and snow attack; The coating provides protection due to temperature differences, freeze-thaw cycles, corrosive gases and microorganisms. Especially suitable for interior decoration and advertising board.
Fluorocarbon coatings in addition to the mechanical properties of wear resistance, impact resistance has excellent performance, especially in harsh climate and environment shows a long-term fading resistance, uv resistance. After high temperature barbecue film, the molecular structure of the coating is close, with super weather resistance. American research institutions have tested fluorocarbon coating and super coating, general coating comparison, to ensure the use of all kinds of harsh environment. Especially suitable for indoor and outdoor decoration of public places, commercial chain, exhibition and advertising decoration and display.
What should I pay attention to when using it?
If you want to put into use, to the normal temperature, temperature can not overheat can not be too cold; Before the installation, timely check to ensure that the roof material does not wear appearance, to ensure that it can be used normally, in normal circumstances to ensure the use of life; The bolt head fixed color coated aluminum coil should be sealed with waterproof material to avoid rain into rust.
Color coated aluminum coil processing environment temperature should be above 7℃, according to the thickness of the color coated aluminum coil to adjust the gap of the processing roller system, and remove the roller surface and the foreign body on the pallet, at the same time to check whether the color coated aluminum coil on both sides of the paint, such as paint, should find out the reason and take measures to continue processing.
Through the above introduction, we understand the relevant content of the aluminum coil state. Only when we understand the relevant aluminum coil state, can we manufacture items with different characteristics according to different states of aluminum coil. More content to the website www.xiangbolan.com consultation!